{"title":"Electronic LED Flasher Relays","description":"\u003cdiv class=\"customled-relay-collection-intro\"\u003e\n\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n  \u003cstrong\u003eNot sure which relay fits your motorcycle?\u003c\/strong\u003e\n  \u003cspan\u003eSearch by motorcycle make, model, year, or OEM relay part number.\u003c\/span\u003e\n  \u003ca class=\"button customled-fitment-cta__button\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\n  \u003cp\u003e\n    Custom LED currently has five different Electronic LED Flasher Relays for motorcycles, which are designed to blink at the normal blink rate - regardless of what type of blinker lamps are installed on your motorcycle.\n  \u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 46px;\"\u003e\n    With \u003cem\u003enearly\u003c\/em\u003e a zero minimum load requirement of 0.05A, and an extremely short time to first-blink, these LED flasher relays will operate properly under conditions that the OEM flasher relay will blink fast, or will not blink at all. Read more about each product on the respective product pages.\n  \u003c\/p\u003e\n\n\u003c\/div\u003e\n","products":[{"product_id":"elfr-1-electronic-led-flasher-relay","title":"ELFR-1 Electronic LED Flasher Relay with OEM Connector","description":"\u003cul\u003e\n\u003cli\u003eMaintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003ePlug and play connectivity with OEM connector for compatible 2-wire \u003cstrong\u003eAND\u003c\/strong\u003e 3-wire OEM Flasher Relay Connectors. Use our compatibility guide to confirm fitment before ordering.\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for all Custom LED Integrated LED Tail Lights.\u003c\/li\u003e\n\u003cli\u003eNear zero initial turn-on delay (other LED relays delay when signals are first engaged).\u003c\/li\u003e\n\u003cli\u003e1-year \u003ca href=\"\/en-ae\/pages\/custom-led-policies\" title=\"Custom LED's Warranty Policy\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca href=\"\/en-ae\/pages\/custom-led-policies\" title=\"Custom LED's Satisfaction Guarantee\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNot sure if this relay fits your motorcycle?\u003c\/strong\u003e\n\u003cspan\u003eSearch by motorcycle make, model, year, or OEM flasher relay part number.\u003c\/span\u003e\n\u003ca class=\"button customled-fitment-cta__button\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNow you can finally fix the flash rate on your motorcycle with our unique Plug And Play solution\u003c\/strong\u003e!  That's right, our Electronic LED Flasher relay directly replaces the stock flasher relay on many Yamaha, Honda, Kawasaki, Suzuki, KTM, Triumph, and other motorcycles by plugging directly into the harness in place of the OEM flasher relay.\u003c\/p\u003e\n\u003cp\u003eWhether your OEM relay has 2-wires or 3-wires, our flasher relay is a direct replacement for compatible motorcycles when the 3rd wire is simply a ground connection, which our relay does not require. Use our \u003ca title=\"Motorcycle LED Flasher Relay Compatibility Guide\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eMotorcycle LED Flasher Relay Compatibility Guide\u003c\/a\u003e to confirm whether the ELFR-1 is the correct Custom LED relay for your motorcycle.\u003c\/p\u003e\n\u003cp\u003eFor motorcycles with nonstandard two wire flasher relays, this flasher relay can still be used by removing the connector and hard-wiring it. Even three wire flasher relays can be replaced if one of the wires is a ground wire. We also have a connector option on our \u003ca title=\"LED Flasher Relay with Quick Disconnects\" href=\"\/en-ae\/products\/elfr-1-qd-electronic-led-flasher-relay\"\u003eELFR-1-QD\u003c\/a\u003e model, which may be more useful for hard-wire and custom applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis unit is guaranteed to replace any two-wire flasher relay and operate at the normal DOT blink rate for motorcycles with stock blinkers, LED blinkers, or any combination of both\u003c\/strong\u003e, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) - which basically covers the majority of blinker products on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the Installation Tab for more important details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e\u003cstrong\u003eYour motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).\u003c\/strong\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 10A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Rate: Constant\u003c\/li\u003e\n\u003cli\u003eSize: 1.2\" x 1.77\" x 0.74\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-1 Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUse our Motorcycle LED Flasher Relay Compatibility Guide to confirm the correct Custom LED relay before ordering.\u003c\/strong\u003e The guide includes compatible motorcycles, recommended Custom LED relay model, OEM relay part numbers or relay body markings when available, and important fitment notes.\u003c\/p\u003e\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNot sure if this relay fits your motorcycle?\u003c\/strong\u003e\n\u003cspan\u003eSearch by motorcycle make, model, year, or OEM flasher relay part number.\u003c\/span\u003e\n\u003ca class=\"button customled-fitment-cta__button\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This guide is intended for U.S.-spec applications unless otherwise noted. Non-U.S. models, previous owner wiring changes, and mid-year production changes may differ. When in doubt, compare your motorcycle's original flasher relay connector before ordering.\u003c\/p\u003e\n\u003cp\u003eIf your motorcycle is not listed, the ELFR-1 may still work as a hard-wire replacement for many two-wire flasher relay systems, or three-wire systems where the third wire is only a ground. See the Installation tab for general hard-wire guidance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe videos in this playlist are user-submitted and original videos related to this product. Use the \u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 24 24\" width=\"1.25em\" height=\"1.25em\" style=\"vertical-align:-0.25em;display:inline-block\"\u003e\u003cpath d=\"M6 18l8.5-6L6 6v12zM16 6v12h2V6h-2z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e button in the player to cycle through them.\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Custom LED ELFR-1 Plug-And-Play Electronic LED Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and replace the OEM flasher relay on the motorcycle.  If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-1 is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/INSTRUCTION_SHEET_WEB.pdf?v=1615492393\" title=\"Custom LED ELFR-1 Electronic LED Flasher Relay Installation Instructions\"\u003e\u003cimg alt=\"Installation Instructions\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center; color: #999999; line-height: 1.5; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca href=\"https:\/\/get.adobe.com\/reader\/\" title=\"Download Adobe Reader\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGeneral hard-wire installation guidance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e You may lose your self-canceling feature by replacing the flasher relay if your bike is equipped from the factory with self-canceling turn signals. If you want to keep this feature, use our \u003ca href=\"\/en-ae\/products\/stage-ii-load-equalizer\" title=\"Universal Motorcycle 25 Watt Load Equalizer for Blinkers| Custom LED\"\u003e25 Watt Load Equalizers\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003eIf your existing flasher relay is a two wire flasher relay (or a three wire with a ground wire), and you have access to it, you can replace it with our flasher relay.\u003c\/p\u003e\n\u003cp\u003eIdentify and connect the wires leading to the OEM flasher relay as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed wire on ELFR-1 to power source (ignition switched +12v)\u003c\/li\u003e\n\u003cli\u003eBlack wire on ELFR-1 to load (blinker lamps \/ blinker switch)\u003c\/li\u003e\n\u003cli\u003eIf the factory connector has a ground wire, leave it unconnected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIf you find that your motorcycle's flasher relay is not two-wire and\/or replaceable, you may use the \u003ca href=\"\/en-ae\/collections\/universal-led-load-equalizers\" title=\"Universal Motorcycle Load Equalizer for LED Blinkers and Turn Signals\"\u003eCustom LED Universal Load Equalizers\u003c\/a\u003e along with your stock flasher relay instead.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems. These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps. Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages. Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":569285629,"sku":"ELFR-1","price":22.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-1-LED-Relay-1.jpg?v=1558405919"},{"product_id":"elfr-1-qd-electronic-led-flasher-relay","title":"ELFR-1-QD Electronic LED Flasher Relay with Quick Disconnects","description":"\u003cul\u003e\n\u003cli\u003eMaintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003eQuick-disconnect terminals for compatible OEM flasher relay connectors. Use our compatibility guide to confirm fitment before ordering.\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for all Custom LED Integrated LED Tail Lights.\u003c\/li\u003e\n\u003cli\u003eNear zero initial turn-on delay (other LED relays delay when signals are first engaged).\u003c\/li\u003e\n\u003cli\u003e1-Year \u003ca title=\"Custom LED's Frequently Asked Questions and Policies\" href=\"\/en-ae\/pages\/custom-led-frequently-asked-questions\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca title=\"Custom LED's Frequently Asked Questions and Policies\" href=\"\/en-ae\/pages\/custom-led-frequently-asked-questions\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNot sure if this relay fits your motorcycle?\u003c\/strong\u003e\n\u003cspan\u003eSearch by motorcycle make, model, year, or OEM flasher relay part number.\u003c\/span\u003e\n\u003ca class=\"button customled-fitment-cta__button\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe ELFR-1-QD is the same electronic LED flasher relay as our \u003ca title=\"ELFR-1 LED Flasher Relay\" href=\"\/en-ae\/products\/elfr-1-electronic-led-flasher-relay\"\u003eELFR-1 LED flasher relay\u003c\/a\u003e, but with male quick-disconnect terminals installed on the wires. These terminals can plug directly into some compatible OEM flasher relay connectors, or can be useful for custom and hard-wire applications.\u003c\/p\u003e\n\u003cp\u003eThe ELFR-1-QD is designed to restore the normal blink rate on compatible motorcycles with stock blinkers, LED blinkers, or any combination of both, provided the total load on the system is within 0.05A to 10A.\u003c\/p\u003e\n\u003cp\u003eUse our \u003ca href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\" title=\"Motorcycle LED Flasher Relay Compatibility Guide\"\u003eMotorcycle LED Flasher Relay Compatibility Guide\u003c\/a\u003e to confirm whether the ELFR-1-QD is the correct Custom LED relay for your motorcycle before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncorrect connection can permanently damage the ELFR-1-QD relay.\u003c\/strong\u003e If your motorcycle is not listed in the guide, compare your OEM flasher relay connector carefully and identify the correct switched-power and load-output terminals before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the Installation Tab for more important details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e\u003cstrong\u003eYour motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).\u003c\/strong\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 10A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Rate: Constant\u003c\/li\u003e\n\u003cli\u003eSize: 1.2\" x 1.77\" x 0.74\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-1-QD Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUse our Motorcycle LED Flasher Relay Compatibility Guide to confirm the correct Custom LED relay before ordering.\u003c\/strong\u003e The guide includes compatible motorcycles, recommended Custom LED relay model, OEM relay part numbers or relay body markings when available, and important fitment notes.\u003c\/p\u003e\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNot sure if this relay fits your motorcycle?\u003c\/strong\u003e\n\u003cspan\u003eSearch by motorcycle make, model, year, or OEM flasher relay part number.\u003c\/span\u003e\n\u003ca class=\"button customled-fitment-cta__button\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This guide is intended for U.S.-spec applications unless otherwise noted. Non-U.S. models, previous owner wiring changes, and mid-year production changes may differ. When in doubt, compare your motorcycle's original flasher relay connector before ordering.\u003c\/p\u003e\n\u003cp\u003eIf your motorcycle is not listed, the ELFR-1-QD may still be usable for many two-wire flasher relay systems, or three-wire systems where the third wire is only a ground, but the correct switched-power and load-output terminals must be identified before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe videos in this playlist are user-submitted and original videos related to this product. Use the \u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 24 24\" width=\"1.25em\" height=\"1.25em\" style=\"vertical-align:-0.25em;display:inline-block\"\u003e\u003cpath d=\"M6 18l8.5-6L6 6v12zM16 6v12h2V6h-2z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e button in the player to cycle through them.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp\u003eThe Custom LED ELFR-1-QD Electronic LED Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and remove the OEM flasher relay on the motorcycle. If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-1-QD is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca title=\"Custom LED ELFR-1-QD Electronic LED Flasher Relay Installation Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/INSTRUCTION_SHEET_WEB.pdf?v=1615492393\"\u003e\u003cimg alt=\"Installation Instructions ELFR-1-QD Electronic LED Flasher Relay\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"color: #999999; line-height: 1.5; text-align: center; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca title=\"Download Adobe Reader\" href=\"https:\/\/get.adobe.com\/reader\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGeneral installation guidance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e You may lose your self-canceling feature by replacing the flasher relay if your bike is equipped from the factory with self-canceling turn signals. If you want to keep this feature, use our \u003ca title=\"Universal Motorcycle 25 Watt Load Equalizer for Blinkers| Custom LED\" href=\"\/en-ae\/products\/stage-ii-load-equalizer\"\u003e25 Watt Load Equalizers\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003eIf your existing flasher relay is a two wire flasher relay, or a three wire flasher relay where the third wire is only a ground wire, and you have access to it, you can replace it with our flasher relay.\u003c\/p\u003e\n\u003cp\u003eIdentify and connect the wires leading to the OEM flasher relay as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed wire on ELFR-1-QD to power source (ignition switched +12v)\u003c\/li\u003e\n\u003cli\u003eBlack wire on ELFR-1-QD to load output (blinker lamps \/ blinker switch)\u003c\/li\u003e\n\u003cli\u003eIf the factory connector has a ground wire, leave it unconnected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the OEM relay body is marked L\/B, match those markings to the harness connector terminals: ELFR-1-QD black wire to the L terminal, and ELFR-1-QD red wire to the B terminal. Otherwise, use a test light or voltmeter to identify the ignition-switched power wire and load-output wire before connecting the relay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you find that your motorcycle's flasher relay is not two-wire and\/or replaceable, you may use the \u003ca title=\"Universal Motorcycle Load Equalizer for LED Blinkers and Turn Signals\" href=\"\/en-ae\/collections\/universal-led-load-equalizers\"\u003eCustom LED Universal Load Equalizers\u003c\/a\u003e along with your stock flasher relay instead.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems. These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps. Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages. Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":569285641,"sku":"ELFR-1-QD","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-1_QD-MAX.jpeg?v=1492797828"},{"product_id":"elfr-p-led-flasher-relay","title":"ELFR-P Programmable Electronic LED Flasher Relay with OEM Connector","description":"\u003cul\u003e\n\u003cli\u003eFeatures \u003ca rel=\"noopener\" title=\"ELFR-P Blink Pattern Demonstration\" href=\"https:\/\/youtu.be\/BfEn7LA-C2Y\" target=\"_blank\"\u003e10 user-selectable blinker flash patterns\u003c\/a\u003e ranging from DOT-style flash to intense strobe modulations.\u003c\/li\u003e\n\u003cli\u003eMaintains the selected blinker flash pattern for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003eProgrammable specialty version for compatible ELFR-1 applications. Use our compatibility guide to confirm ELFR-1 fitment before ordering.\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for Custom LED Integrated LED Tail Lights when a custom flash pattern is desired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e1-year \u003ca href=\"\/en-ae\/pages\/custom-led-policies\" title=\"Custom LED's Warranty Policy\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca href=\"\/en-ae\/pages\/custom-led-policies\" title=\"Custom LED's Satisfaction Guarantee\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNot sure if this relay fits your motorcycle?\u003c\/strong\u003e \u003cspan\u003eELFR-P is the programmable specialty version for applications that use ELFR-1. Search by motorcycle make, model, year, or OEM flasher relay part number.\u003c\/span\u003e \u003ca href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\" class=\"button customled-fitment-cta__button\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eCustom LED ELFR-P Programmable Electronic Flasher Relay\u003c\/strong\u003e! This microcontroller-based electronic flasher relay features 10 preprogrammed, user-selectable flash patterns controlled by a 10-position rotary switch on the compact unit.\u003c\/p\u003e\n\u003cp\u003eThe ELFR-P is best suited for riders who want more than a standard hyper-flash fix. It can provide a normal DOT-style flash pattern, or a more attention-grabbing custom flash pattern, depending on the selected rotary-switch position.\u003c\/p\u003e\n\u003cp\u003eELFR-P shares the same general motorcycle compatibility as our \u003ca title=\"ELFR-1 Electronic LED Flasher Relay\" href=\"\/en-ae\/products\/elfr-1-electronic-led-flasher-relay\"\u003eELFR-1 Electronic LED Flasher Relay\u003c\/a\u003e, but it includes a longer fused harness and requires a separate ground-wire connection. Use our \u003ca href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\" title=\"Motorcycle LED Flasher Relay Compatibility Guide\"\u003eMotorcycle LED Flasher Relay Compatibility Guide\u003c\/a\u003e to confirm whether your motorcycle is compatible with ELFR-1 before ordering ELFR-P.\u003c\/p\u003e\n\u003cp\u003eThe longer harness allows the programmable relay module to be mounted in a convenient location so the flash pattern selector remains accessible when desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you only need to fix fast blink \/ hyper flash, and do not need selectable flash patterns, the standard ELFR-1 is usually the simpler choice.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the Installation Tab for more important details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e\u003cstrong\u003eYour motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).\u003c\/strong\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 5A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Patterns: 10 user-selectable patterns\u003c\/li\u003e\n\u003cli\u003ePattern Selection: 10-position rotary switch\u003c\/li\u003e\n\u003cli\u003eSize: 2.36\" x 1.68\" x 0.67\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-P Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eELFR-P is the programmable specialty version for motorcycles that use ELFR-1.\u003c\/strong\u003e Use our Motorcycle LED Flasher Relay Compatibility Guide to confirm whether ELFR-1 is the correct Custom LED relay for your motorcycle before ordering ELFR-P.\u003c\/p\u003e\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNeed to confirm compatibility?\u003c\/strong\u003e \u003cspan\u003eSearch by motorcycle make, model, year, or OEM flasher relay part number. If the guide shows ELFR-1 for your motorcycle, ELFR-P may be used as the programmable alternative.\u003c\/span\u003e \u003ca href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\" class=\"button customled-fitment-cta__button\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e ELFR-P requires a separate ground-wire connection in addition to the flasher relay connections. Confirm that there is enough room to mount the relay module and harness, and that the ground wire can be connected to a suitable chassis or battery negative ground point.\u003c\/p\u003e\n\u003cp\u003eThis guide is intended for U.S.-spec applications unless otherwise noted. Non-U.S. models, previous owner wiring changes, and mid-year production changes may differ. When in doubt, compare your motorcycle's original flasher relay connector before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe videos in this playlist are user-submitted and original videos related to this product. Use the \u003csvg style=\"vertical-align: -0.25em; display: inline-block;\" height=\"1.25em\" width=\"1.25em\" viewbox=\"0 0 24 24\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath fill=\"currentColor\" d=\"M6 18l8.5-6L6 6v12zM16 6v12h2V6h-2z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e button in the player to cycle through them.\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Custom LED ELFR-P Programmable Electronic Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and remove the OEM flasher relay on the motorcycle. If you are unfamiliar with the location of your OEM flasher relay, motorcycle wiring, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-P is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/ELFR-P_Installation.pdf?98\" title=\"ELFR-P Programmable LED Flasher Relay for LED Blinkers Turn Signals by Custom LED\"\u003e\u003cimg align=\"middle\" alt=\"ELFR-P Installation Instructions\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"color: #999999; line-height: 1.5; text-align: center; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca href=\"https:\/\/get.adobe.com\/reader\/\" title=\"Download Adobe Reader\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGeneral installation guidance\u003c\/h3\u003e\n\u003cp\u003eELFR-P includes a fused harness and a separate ground wire. The ground wire with loop connector must be connected to a common ground point, such as the motorcycle frame or battery negative terminal.\u003c\/p\u003e\n\u003cp\u003eIf your existing flasher relay is a two wire flasher relay, or a three wire flasher relay where the third wire is only a ground wire, and you have access to it, the ELFR-P may be installed in place of the OEM flasher relay.\u003c\/p\u003e\n\u003cp\u003eIdentify and connect the wires leading to the OEM flasher relay as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed wire on ELFR-P to power source (ignition switched +12v)\u003c\/li\u003e\n\u003cli\u003eWhite wire on ELFR-P to load output (blinker lamps \/ blinker switch)\u003c\/li\u003e\n\u003cli\u003eGround wire on ELFR-P to a suitable chassis or battery negative ground point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e You may lose your self-canceling feature by replacing the flasher relay if your bike is equipped from the factory with self-canceling turn signals. If you want to keep this feature, use our \u003ca href=\"\/en-ae\/products\/stage-ii-load-equalizer\" title=\"Universal Motorcycle 25 Watt Load Equalizer for Blinkers| Custom LED\"\u003e25 Watt Load Equalizers\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you find that your motorcycle's flasher relay is not two-wire and\/or replaceable, you may use the \u003ca href=\"\/en-ae\/collections\/universal-led-load-equalizers\" title=\"Universal Motorcycle Load Equalizer for LED Blinkers and Turn Signals\"\u003eCustom LED Universal Load Equalizers\u003c\/a\u003e along with your stock flasher relay instead.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems. These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps. Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way hazard blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages. Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":570381181,"sku":"ELFR-P","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-P_3_max.jpg?v=1558406030"},{"product_id":"elfr-1-h-electronic-led-flasher-relay-4-pin-honda","title":"ELFR-1-H Electronic LED Flasher Relay 4-Pin Honda","description":"\u003cul\u003e\n\u003cli\u003eMaintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003ePlug and play connectivity with compatible Honda OEM flasher relay connectors. Use our compatibility guide to confirm fitment before ordering.\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for Custom LED Integrated LED Tail Lights.\u003c\/li\u003e\n\u003cli\u003eNear zero initial turn-on delay (other LED relays delay when signals are first engaged).\u003c\/li\u003e\n\u003cli\u003e1-year \u003ca title=\"Custom LED's Warranty Policy\" href=\"\/en-ae\/pages\/custom-led-policies\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca title=\"Custom LED's Satisfaction Guarantee\" href=\"\/en-ae\/pages\/custom-led-policies\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNot sure if this relay fits your motorcycle?\u003c\/strong\u003e\n\u003cspan\u003eSearch by motorcycle make, model, year, or OEM flasher relay part number.\u003c\/span\u003e\n\u003ca class=\"button customled-fitment-cta__button\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNow you can finally fix the flash rate on your Honda motorcycle with our unique Plug And Play solution\u003c\/strong\u003e!  That's right, our Electronic LED Flasher relay directly replaces the stock flasher relay on compatible Honda motorcycles by plugging directly into the harness in place of the OEM flasher relay.\u003c\/p\u003e\n\u003cp\u003eThe ELFR-1-H is designed for compatible Honda applications with the matching OEM flasher relay connector. It restores the normal blink rate on compatible motorcycles with stock blinkers, LED blinkers, or any combination of both.\u003c\/p\u003e\n\u003cp\u003eUse our \u003ca title=\"Motorcycle LED Flasher Relay Compatibility Guide\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eMotorcycle LED Flasher Relay Compatibility Guide\u003c\/a\u003e to confirm whether the ELFR-1-H is the correct Custom LED relay for your motorcycle before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis unit is guaranteed to operate at the normal DOT blink rate for compatible motorcycles with stock blinkers, LED blinkers, or any combination of both\u003c\/strong\u003e, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) - which basically covers the majority of blinker products on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the Installation Tab for more important details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e\u003cstrong\u003eYour motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).\u003c\/strong\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 10A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Rate: Constant\u003c\/li\u003e\n\u003cli\u003eSize: 1.2\" x 1.77\" x 0.74\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-1-H Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUse our Motorcycle LED Flasher Relay Compatibility Guide to confirm the correct Custom LED relay before ordering.\u003c\/strong\u003e The guide includes compatible motorcycles, recommended Custom LED relay model, OEM relay part numbers or relay body markings when available, and important fitment notes.\u003c\/p\u003e\n\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNot sure if this relay fits your motorcycle?\u003c\/strong\u003e\n\u003cspan\u003eSearch by motorcycle make, model, year, or OEM flasher relay part number.\u003c\/span\u003e\n\u003ca class=\"button customled-fitment-cta__button\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This guide is intended for U.S.-spec applications unless otherwise noted. Non-U.S. models, previous owner wiring changes, and mid-year production changes may differ. When in doubt, compare your motorcycle's original flasher relay connector before ordering.\u003c\/p\u003e\n\u003cp\u003eIf your motorcycle is not listed for the ELFR-1-H, do not assume this relay will fit. Use the compatibility guide to select the correct Custom LED relay, or use \u003ca href=\"\/en-ae\/collections\/universal-led-load-equalizers\" title=\"Universal Motorcycle Load Equalizer for LED Blinkers and Turn Signals\"\u003eCustom LED Universal Load Equalizers\u003c\/a\u003e along with your stock flasher relay if your OEM relay is not replaceable.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe videos in this playlist are user-submitted and original videos related to this product. Use the \u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 24 24\" width=\"1.25em\" height=\"1.25em\" style=\"vertical-align:-0.25em;display:inline-block\"\u003e\u003cpath d=\"M6 18l8.5-6L6 6v12zM16 6v12h2V6h-2z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e button in the player to cycle through them.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp\u003eThe Custom LED ELFR-1-H Plug-And-Play Electronic LED Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and remove the OEM flasher relay on your motorcycle to install the ELFR-1-H in its place. If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-1-H is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca title=\"Custom LED ELFR-1-H Electronic LED Flasher Relay Installation Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/INSTRUCTION_SHEET_WEB.pdf?v=1615492393\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\" alt=\"ELFR-1-H Installation Instructions\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center; color: #999999; line-height: 1.5; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca title=\"Download Adobe Reader\" href=\"https:\/\/get.adobe.com\/reader\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems. These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps. Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way hazard blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages. Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":27347597833,"sku":"ELFR-1-H","price":27.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-1-H-4.jpg?v=1673493728"},{"product_id":"elfr-1-u-electronic-led-flasher-relay-7-pin-suzuki","title":"ELFR-1-U Electronic LED Flasher Relay 7-Pin Suzuki","description":"\u003cul\u003e\n\u003cli\u003eMaintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003ePlug and play connectivity with compatible Suzuki OEM combination relay connectors. Use our compatibility guide to confirm fitment before ordering.\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for Custom LED Integrated LED Tail Lights.\u003c\/li\u003e\n\u003cli\u003eNear zero initial turn-on delay (other LED relays delay when signals are first engaged).\u003c\/li\u003e\n\u003cli\u003e1-year \u003ca title=\"Custom LED's Warranty Policy\" href=\"\/en-ae\/pages\/custom-led-policies\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca title=\"Custom LED's Satisfaction Guarantee\" href=\"\/en-ae\/pages\/custom-led-policies\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNot sure if this relay fits your motorcycle?\u003c\/strong\u003e\n\u003cspan\u003eSearch by motorcycle make, model, year, or OEM flasher relay part number.\u003c\/span\u003e\n\u003ca class=\"button customled-fitment-cta__button\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNow you can finally fix the flash rate on your Suzuki motorcycle with our unique Plug And Play solution\u003c\/strong\u003e!  That's right, our Electronic LED Flasher relay directly replaces the stock combination relay on compatible Suzuki motorcycles by plugging directly into the harness in place of the OEM flasher relay.\u003c\/p\u003e\n\u003cp\u003eThe ELFR-1-U is designed for compatible Suzuki applications that use a 7-pin OEM combination relay. All supported functions of the OEM combination relay are maintained, with a normal blink rate for the flasher relay function.\u003c\/p\u003e\n\u003cp\u003eUse our \u003ca title=\"Motorcycle LED Flasher Relay Compatibility Guide\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eMotorcycle LED Flasher Relay Compatibility Guide\u003c\/a\u003e to confirm whether the ELFR-1-U is the correct Custom LED relay for your motorcycle before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis unit is guaranteed to operate at the normal DOT blink rate with stock blinkers, LED blinkers, or any combination of both\u003c\/strong\u003e, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) - which basically covers the majority of blinker products on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the Installation Tab for more important details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e\u003cstrong\u003eYour motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).\u003c\/strong\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 10A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Rate: Constant\u003c\/li\u003e\n\u003cli\u003eSize: 1.2\" x 1.77\" x 0.74\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-1-U Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUse our Motorcycle LED Flasher Relay Compatibility Guide to confirm the correct Custom LED relay before ordering.\u003c\/strong\u003e The guide includes compatible motorcycles, recommended Custom LED relay model, OEM relay part numbers or relay body markings when available, and important fitment notes.\u003c\/p\u003e\n\n\u003cdiv class=\"customled-fitment-cta\"\u003e\n\u003cstrong\u003eNot sure if this relay fits your motorcycle?\u003c\/strong\u003e\n\u003cspan\u003eSearch by motorcycle make, model, year, or OEM flasher relay part number.\u003c\/span\u003e\n\u003ca class=\"button customled-fitment-cta__button\" href=\"\/en-ae\/pages\/motorcycle-led-flasher-relay-compatibility\"\u003eFind My Relay\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This guide is intended for U.S.-spec applications unless otherwise noted. Non-U.S. models, previous owner wiring changes, and mid-year production changes may differ. When in doubt, compare your motorcycle's original flasher relay connector before ordering.\u003c\/p\u003e\n\u003cp\u003eIf your motorcycle is not listed for the ELFR-1-U, do not assume this relay will fit. Use the compatibility guide to select the correct Custom LED relay, or use \u003ca href=\"\/en-ae\/collections\/universal-led-load-equalizers\" title=\"Universal Motorcycle Load Equalizer for LED Blinkers and Turn Signals\"\u003eCustom LED Universal Load Equalizers\u003c\/a\u003e along with your stock flasher relay if your OEM relay is not replaceable.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe videos in this playlist are user-submitted and original videos related to this product. Use the \u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 24 24\" width=\"1.25em\" height=\"1.25em\" style=\"vertical-align:-0.25em;display:inline-block\"\u003e\u003cpath d=\"M6 18l8.5-6L6 6v12zM16 6v12h2V6h-2z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e button in the player to cycle through them.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp\u003eThe Custom LED ELFR-1-U Plug-And-Play Electronic LED Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and remove the OEM flasher relay on the motorcycle. If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-1-U is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/INSTRUCTION_SHEET_WEB.pdf?v=1615492393\" title=\"Custom LED ELFR-1-U Electronic LED Flasher Relay Installation Instructions\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\" alt=\"ELFR-1-U Installation Instructions\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center; color: #999999; line-height: 1.5; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca title=\"Download Adobe Reader\" href=\"https:\/\/get.adobe.com\/reader\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems. These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps. Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way hazard blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages. Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":19622147457122,"sku":"ELFR-1-U","price":27.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-1-U-5.jpg?v=1558405995"}],"url":"https:\/\/www.customled.com\/en-ae\/collections\/electronic-led-flasher-relays.oembed","provider":"Custom LED","version":"1.0","type":"link"}