Definitely great service and products. The custom work they did for me was top notch from design to finished product. Next project is in planning now and I'll be using Custom LED to create it!

Geeb Robertson - reading Pennsylvania

Installed the flasher relay in about 5 seconds and it works like a charm. These are great folks to deal with.

Aaron B - Toronto - '07 CBR600RR

AWESOME LIGHT!!!!!!! Looks great with MIG underseat exhaust.

- Anand - 954RR Tail

I just bought a 2003 R-6 and just found your web site, I am very happy with the bike, and I'm loving the product you produce for it.

- Evan - 2003 R6 Tail - Olympia Washington

Dear Custom LED, I ordered my kit on Friday, and received it in the mail on Monday! It looks absolutely wonderful on my bike. Even one of my Harley neighbors complimented it! And he has a hard time complimenting ANYTHING for my sportbike!! Thanks again for your product and the expeditious delivery of it as well!!

- Chad - Universal LED Flushmounts - Colorado Springs, CO

Thanks Jon, I just installed the equalizers and my blinkers work perfect. I wish the company I bought my leds from would have told me that I would have had this problem. Your product is Awsome.

- Ankur - Stage II Load Equalizer.

Just wanted to say that the integraded led tail light for the honda 600RR is off the hook!!!(in a very good way). For those who are intrested in getting it. GET IT! Trust me you'll be well more than happy w/the results. The pic you see for the tail light doesn't do it any justice! but yea. thank you Custom LED.

- Merrill - CBR 600RR Integrated Tail - Oakland, CA

Just installed the integrated custom LED taillight for my 2004 R1..this is some serious piece of work gents..nice effect..looks great, bright as hell, great flashers day or night..a must have customization for all riders!

- CrayZAl - 2004 YZF R1 Integrated Tail - Newburgh, NY

I am very impressed with Customleds' shipping time, usually it takes 2 wks any where else.The flushmounts were well packaged.I am also impressed with the look of the flushmounts.Thanks alot. My bike is a Yamaha 600R.

- Mont - Yamaha 600R - Franklin, TN

Well, what can I say!.. CustomLED were a breath of fresh air to me! They deisgned a total one-off to my own specifiation. It really finished the bike off. I would recommend acumen no load relays. they are totally electronic and sort out ANY flasher problems on any lights!!!.

- Adam Park - Custom YZF R1 Tail - England

I got lights for my r6 2003 tail lights they r brilliant much better then the picture cheers 4 that.

- G Cornwall - 2003 YZF R6 Tail -

I ordered your Flushmounts with the Stage II Equalizers for my 2004 YZF600. The quality of your products is excellent, along with the packaging & fast shipping!!

- Brad - 2004 YZF 600 - FL

GOT THE LOAD EQUALIZERS INSTALLED WITH HOTBODIES FLUSH MOUNT FRONT TURN SIGNALS ON A 2004 HONDA CBR600RR...EVERYTHING IS WORKING FINE NOW! ORDERED AND GOT THEM IN A DAY...THE LOCAL HONDA SHOP WAS GONNA TAKE 1 WEEK AND I HAD TO RIDE. YOU GUYS WERE GREAT!

- jay - MONTGOMERY, AL

Dear CustomLED, I've made an order one week ago and arrive very fast in ITALY. I decided to use into a YamaHa FZ6-N with OEM Turnlight with led bulbs, in detail 3 led for each bulb. With this flash relays the flasher is very well and the hazard is ok in every bulbs at the same time. I decide to use CustomLED, because in ITALY this item isn't sell or the few shop make expensive cost. Thanks for all and with your electronic led flasher relay the life is more easy.

- Tiziano Terenghi - Italy

I just installed the flasher relay on my 2003 Yamaha R1, it works perfectly. It only took a few minutes to install
This is the second product I have ordered from you I have the integrater already installed. I have the flush mounts and I will install them in a couple of days. Thanks for the great products I will recomend them to anyone who ask's where I got them.

- dean 2003 R1 limited - vero beach florida

Thanks for all you do!!! I searched high and low around the Des Moines, Iowa area for a flasher, and LED's must be a foreign concept. Thanks to you, I now have a V65 Magna with LED turn signals that blink PROPERLY!! Thanks again, Jeff

- Jeff Christensen - V65 Magna - Wick, Iowa

Thanks for the fast delivery, purchased on Monday - delivered on Thursday. Super easy installation and great visibility. Makes my VTR1000 look sweet. Will get another set for the rear when I install an Undertail, soon.

- Don - VTR1000 - Loveland , CO

Light is awesome!! i got the integrated circuit board for the 06 r1 this thing is ridiculously bright and i love the signals integrated nice clean look thanks to you guys and your awesome work, easy to install with the detailed instructions i couldn't have asked for a better product, and a more friendly and helpfull guide thanks again custom led!!!!

- David - 2006 r1 - washington State

Installed the ELFR-1. So much better than a bunch of power hungry resistors. Does the job. Excellent

- Allen Nuzik - Kansas City

Hi Jon. I just wanted to send a quick note to thank you for your incredible work on my recent custom LED project for my motorcycle. The finished product is impeccable; I am glad I did not attempt this project myself. Your communication throughout the project was top notch, and I always felt I knew exactly what was going on at all times. I will definitely use your company in the future for my custom LED needs!

-Darren Pallen - Custom LED Clusters - USA

Thanks Jon, Great service, I special ordered a pair LED flushmounts on a Monday and received the order two days later on Wednesday. (Great product) exactly what I was looking for.

-John D. - Universal flushmount inserts - Phoenix AZ.

 

!

WWWwww.customled.com

© Custom LED LLC. All Rights Reserved.