Hyper-X High-Power LED Modules and Driver

The Hyper-X LED Module is a High-Power 1 Watt LED module that produces an incredible amount of light.  This module is designed to operate in conjunction with the Hyper-X LED Driver to provide dual-intensity (3-wire) operation of the LED.

They are currently available in: Red, Amber, White and Blue for a variety of applications.

Measuring only 20mm (0.78") in diameter, its about the size of a Nickel, and puts out as much light as a 10W bulb, while only consuming 1W of power.  This product is extremely versatile for custom applications where high-intensities or small sizes are required.  Retrofitting existing housings and enclosures with this LED module is as simple as gluing it in place.  For more secure installations, the two notches can be used to center mounting screws.

Up to three red or amber Hyper-X LED Modules can be run off of a single Hyper-X LED Driver, and up to two white or blue Hyper-X LED Modules can be run off of a single Hyper-X LED Driver!  The Custom LED Hyper-X LED Drivers come with detailed wiring instructions.

The modules are not waterproof and are intended to be mounted inside of a suitable enclosure.

The Hyper-X LED Modules have the following specifications:

• LED Wattage class: 1 Watt
• Size: 0.78" Diameter, 0.15" Thick (with wires)
• Current draw: <350mA (bright)
• Waterproof: NO
• Viewing Angle: 120 Degrees
• Blue Intensity: 12~20 Lumens, 465~475 nm
• Red Intensity: 45~70 Lumens, 624 nm
• White Intensity: 114~138 Lumens, 6000K
• Amber Intensity: 45~70 Lumens, 598 nm

 

Installation of the Hyper-X LED Driver is as follows:

click icon to download

 

Adobe Acrobat Reader is required to view this file.

If you are having problems viewing the file, please download the free software here..

Custom LED consistently receives rave reviews from our customers about our products!  We try to post a representative group of them on our feedback page on this site, but we can't post them all! 

Our Feedback Profile on our Ebay Auctions are a great way to see what our customers think of our products, because Ebay promotes honest feedback.  Take a look at our Ebay Feedback!

Our commitment to quality, honesty, ingenuity and customer service is really making an impact in an industry full of careless "sell anything" retailers and hack-artist copy-cats.  Trust in our products, and see for yourself...

The Hyper-X LED Driver is designed to power the Hyper-X LED Modules with dual-intensity and current regulation.  The driver has two inputs (dim/bright), and one output to connect to the Hyper-X LED Module(s).

One single Driver will power up to 3 red or amber LED modules, and 2 white or blue LED modules when wired as per the provided instructions.

The Hyper-X LED Driver has the following specifications:

• Input Voltage: 24vdc max, min depends on number of LEDs driven.
• Size: Approximately 2" x 0.4" x 0.81"
• Current draw: <350mA (bright)
• Waterproof: YES

 

 

Installation of the Hyper-X LED Driver is as follows:

click icon to download

 

Adobe Acrobat Reader is required to view this file.

If you are having problems viewing the file, please download the free software here..

Custom LED consistently receives rave reviews from our customers about our products!  We try to post a representative group of them on our feedback page on this site, but we can't post them all! 

Our Feedback Profile on our Ebay Auctions are a great way to see what our customers think of our products, because Ebay promotes honest feedback.  Take a look at our Ebay Feedback!

Our commitment to quality, honesty, ingenuity and customer service is really making an impact in an industry full of careless "sell anything" retailers and hack-artist copy-cats.  Trust in our products, and see for yourself...