Brake Light Flashers
Alert motorists behind you when it matters most..
Not sure which relay fits your motorcycle?
Search by motorcycle make, model, year, or OEM relay part number.
Find My Relay
Fixes the fast-blink rate for motorcycles that come with LED turn signals from the factory - replaces roughly the same wattage as the factory LED lamps. (Some systems require two per corner wired in parallel - 4 Watts total per corner). Fixes the no-blink and 4-way blink problems for some blinker...
- Fixes the fast-blink rate for motorcycles that come with LED turn signals from the factory - replaces roughly the same wattage as the factory LED lamps. (Some systems require two per corner wired in parallel - 4 Watts total per corner).
- Fixes the no-blink and 4-way blink problems for some blinker systems (Note: some systems require more than one pair, or larger Load Equalizers.)
- Comes with non destructive quick-tap connectors.
- Comes with detailed installation instructions.
- Superior "Oversized" design prevents excessive heat buildup.
- Sold as pairs (two per order).
- Made in the USA.
- 1-Year Warranty & Satisfaction Guarantee.
Overview
The 2-Watt Load Equalizer (formerly known as Stage I Load Equalizer) may be for you if the following matches your situation after changing your incandescent bulbs to LEDs:
- your bike had LED blinkers from the factory, and you switched them over to aftermarket LED blinkers and now they blink fast.
- the blinkers do not blink at all - either they turn on and stay on solid or they don't even come on at all
- the left and right directional signals illuminate at the same time when activated (4-way blink problem)
The 2-Watt Load Equalizer adds 2 Watts of load to the turn signal system, to make the turn signal system function at the correct speed, after replacing your OEM LED blinker lamps on your motorcycle with aftermarket lamps that draw less power.
For the 4-way blink problem, sometimes one pair of our 2-Watt Load Equalizers is sufficient. However, some motorcycles require more than one pair (particularly on older bikes) in which case it may make sense to go with one pair of the 10-Watt or 25-Watt Load Equalizers instead.
Our 2-Watt Load Equalizer couldn't be easier to install! The device is very small and connects to the blinker wires. Your order will come with detailed instructions and simple tap connectors that do not require any cutting or splicing of the factory wiring!
Our Load Equalizers are over designed and over sized for excellent heat capacity. They will not get too hot under normal operation. You wont have any overheating problems with our products!
BEFORE CHOOSING A LOAD EQUALIZER TO CORRECT YOUR BLINKER FLASH RATE, BE SURE TO SEE OUR ELECTRONIC LED FLASHER RELAY WITH PLUG AND PLAY CONVENIENCE! IT'S THE BETTER AND CHEAPER SOLUTION TO THE PROBLEM!
Installation
The Custom LED 2-Watt Load Equalizers come with detailed installation instructions as follows:
Click icon to download.
Adobe Acrobat Reader is required to view this file.
If you are having problems viewing the file, please download the free software here.
Instagram Feed
Tag us @Custom_LED_LLC in your Instagram Photos to see your photos here!