The Custom LED Wicked Strobe is a stand alone programmable LED Strobe Module capable of super-intense strobe modulations.  There are 7 onboard strobe patterns that can be individually selected VIA a single program wire - and an automatic mode that cycles through each!  

There is also an ultra bright steady-on mode, producing a very high intensity light.  This means that the Wicked Strobe Modules can also be used as super bright auxiliary marker lights, brake lights, or turn signals! 

Multiple units can be used and will automatically maintain synchronization with each other!

The super-compact Wicked Strobe Module measures only 2" x 0.86" x 0.5" L x W x D and comes with an 18" long cable assembly (3-wire: power, ground and program).  Mounting is simply achieved VIA specialty water and heat resistant Double Sided Adhesive Tape (provided).

STROBE COLORS AVAILABLE: RED, AMBER, BLUE AND WHITE

Wicked Strobe Performance Features:

• Super compact size for easy mounting/storage on motorcycle (2" x 0.86" x 0.5" L x W x D)
• Ultra bright light output – maximum possible illumination power.
• 7 intense user selectable strobe patterns, and one steady on super-bright mode.
• Modules require no other electronics or controllers!  Each one is fully autonomous.
• Automatic mode cycles through all 7 strobe patterns continuously.
• Regulated design insures consistent and maximum performance over wide input voltage range (14 - 35 VDC).
• Rugged plastic enclosure for simple double sided tape mounting.
• Weather resistant design.
• 18" long plug-in cable assembly provided.
• Only 3 wire hookup!  Power, ground and communication/program wire.
• Modules maintain synchronization with each other simply by connecting program wires together.

Wicked Strobe Programming Features:

• Programming is achieved simply by intermittently grounding the program wires of each wicked strobe module.
• <1 sec ground on program wire (white) will cycle each module to the next strobe pattern in manual mode.
• >1 sec ground on program wire (white) will put each module into automatic mode.

 

User Video 1

User Video 2

User Video 3

---

In-house Video

 

CLICK HERE TO SEE VIDEO

NOTE: It is very difficult to properly videotape these high-intensity LED strobe lights.  We have yet to find a camera that is capable of accurately reproducing the intensity and clarity of our product.

In the video, the quick strobe pulses in the video are faster than the cameras frame rate.  As a result the video does not show the full intensity and high speed pulses of these patterns.  Actual performance is quite stunning.

We are looking for better videos to properly portray our products.  If you own a Custom LED Wicked Strobe and are able to capture accurate video, Custom LED will BUY your video!  Please contact us.

I purchased a wicked strobe for my 08 Nytro MTX and wired it to my brake light and placed the light just below my seat- facing so snowmobiles behind me can see when I apply my brake. Everyone who I've ridden with so far thinks that it's a really great idea and they like the fact that they can now see ( in the dark) when I apply the brake, going into corners, etc. The strobe gives off more than enough light, where the stock snowmobiles are not seen very well due to the wash from the flying snow. I'm going to buy another one and place it on my wife's sled next. It's a great product and I'd like to see more of these on other sleds in the future.

Corky - Vancouver, Wa.

 

Custom LED consistently receives rave reviews from our customers about our products!  We try to post a representative group of them on our feedback page on this site, but we can't post them all! 

Our Feedback Profile on our Ebay Auctions are a great way to see what our customers think of our products, because Ebay promotes honest feedback.  Take a look at our Ebay Feedback!

Our commitment to quality, honesty, ingenuity and customer service is really making an impact in an industry full of careless "sell anything" retailers and hack-artist copy-cats.  Trust in our products, and see for yourself...