2002-2007 Honda 599 919 Hornet Blaster-X Integrated LED Tail Light

This is an ultra-high intensity, high-performance Integrated LED Tail Light retrofit kit for the 2002-2007 Honda 599 & 919 with built in non-sequential yellow turn signals (want sequential signals?).  This product is designed to directly replace the internals of the Honda 599/919 OEM tail light.

The Custom LED 2002-2007 Honda 599 & 919 Integrated LED Tail Light features black "stealth" electronics for a smoked look, without any loss of performance!  This tail light is designed to operate with either the RED OEM Lens, or an aftermarket clear lens.  With the OEM RED lens, the Integrated LED Tail Light functions entirely with the red LEDs.  amber LEDs will not work properly behind a red lens.  For users with a clear lens, the tail light can be configured to operated with amber LEDs for turns, and red LEDs for run/brake.  This is all user-configurable through the easy to use programming interface! (see below).

The Custom LED 2002-2007 Honda 599 & 919 Integrated LED Tail Light features the latest version of our proprietary and patented Blaster-X technology with Brake Alert and Strobe Mode!  With this product, turn signal function is built into the tail light!  It's the best fender eliminator money can buy.

Brake Alert automatically provides a few quick ultra-bright strobe pulses of light the instant the brakes are applied.  This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists!  The number of pulses can be user-configured VIA our new Programming Interface!  Brake Alert can also be disabled.

Strobe Mode is a feature that puts the taillight into a devastating strobe cycle that is sure to get anyone's attention.  This mode produces insanely bright pulses of light at ultra high frequencies, in alternating patterns across the tail light.  Strobe mode is engaged by grounding a control wire, and can be engaged at any time.

Blaster-X is our proprietary pulse-width-modulation (PWM) technology that squeezes the maximum possible illumination power out of LEDs.  The result is a significantly less expensive, yet even more outstanding and effective product than it's predecessors - and widens our advantage over our competitors.

NEW! This product also marks the introduction of our NEW Programming Interface which allows users to easily customize features of the tail light!  The customizable features menu allows users to:

• Enable or Disable the Startup Sequence.
• Set the turn signal operational mode to amber or red only (for red or clear lens).
• Reset all factory defaults.

This programming interface is accessed very simply through the Strobe Mode control wire!  The interface is designed to receive input simply by providing ground pulses to the strobe mode control wire.  No special equipment is necessary to access and utilize the programming interface!  Detailed programming instructions will ship with every unit.

NEW! And last but not least, our Sure-Blink Technology.  Our Integrated Tail Lights are designed to follow the turn signal commands of the motorcycles flasher relay.  This insures it is compatible with all after market and OEM flasher relays - especially programmable relays such as our ELFR-P.  However, in the event that the tail light receives a command to turn that does not break (blink) within a preset time period, the tail light will automatically blink that side.  This feature is most useful in preventing common no-blink problems that are associated with retrofitting motorcycles to LEDs.  Also, in keeping with this effort, we have also built in our ever popular Stage I Load Equalizers into this tail light!

This high performance Integrated tail light utilizes 32 Ultra Bright Red LEDs and 32 Ultra Bright amber LEDs - compared to only 2 incandescent bulbs!  These LEDs effectively handle the functions of: Running Light (red), Brake Light (red) and Turn Signals (red or amber depending on user-configuration) - all within the tail light housing!

Just as on the other Custom LED Integrated LED Tail Light models, the system is designed so that the red LEDs turn off (on the turn side) when the amber LEDs come on, so that the turn indication is a pure and distinguishable amber light.  The unit automatically flashes between the red and amber on the side you're turning (when using this product as configured for a clear lens).  The amber LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible!  Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

If you would like to find out more information as to Custom LED's design concepts for the Integrated LED Tail Lights, and the purpose of them, read this introduction to Custom LED's Integrated LED Tail Lights.

Custom LED 2002-2009 Honda 599/919 Blaster-X Integrated LED Tail Light Retrofit Kit Features:

• 32 Ultra Bright Red LEDs for running and brake lights (and turn signals in all-red mode for red lens).
• 32 Ultra Bright Yellow LEDs for turn signals.
• Stealth black boards for inconspicuous appearance.
• Custom LED ColorChange Technology on-board.
• Custom LED Blaster-X PWM technology on-board.
• Custom LED Strobe Mode!
• Custom LED Brake Alert!
• New Programming Interface allows users to easily customize features!
• New Sure-Blink Technology
• Built-in Stage I Load Equalizers!
• Robust regulated design for consistent and reliable performance.
• 4 MHz microprocessor controlled operation.
• Detailed step by step instructions with illustrations for a simple install.
• Smart color matched wires matches motorcycle wires for easy wiring.
• Only 5 wires to hook up outside of tail light housing.
• All electrical connectors and hardware provided with kit.
• 24/7 customer support.
• 2-year Warranty & Satisfaction Guarantee!
• MADE IN THE USA!
• NOT DOT approved.

Custom LED 2002-2007 Honda 599/919 Blaster-X Integrated LED Tail Light Retrofit Kit Videos:

• Youtube Video 1 (red lens, red turns)
• Youtube Video 2 (clear lens)
• Youtube Video 3 (clear lens)
• Youtube Video 4

For more videos of our products, check out Custom LED's YouTube Channel.

NOTE: It is very difficult to properly videotape these high-intensity integrated LED tail lights.  We have yet to find a camera that is capable of accurately reproducing the intensity and clarity of our product.

In the video, the pulses in the brake alert feature and strobe mode feature are faster than the cameras frame rate.  As a result the video does not show the full intensity and high speed pulses of these features.

Furthermore, the amber LEDs for the turn signals is clearly and distinctly amber in person.  For some reason, the amber always shows up as red in the videos.

We are looking for better videos to properly portray our products.  If you own a Blaster-X Tail Light and are able to capture accurate video, Custom LED will BUY your video!  Please contact us.

The Custom LED Honda 599 919 Hornet Blaster-X Integrated LED Tail Light retrofit kit must be installed into the OEM tail light.

There may be additional accessories required to correct blinker problems on your motorcycle if you remove your OEM turn signals. These accessories can not be built into the tail light, and are generally optional and specific to different customers needs, so they are sold separately. Please see the recommended accessories above, and read about the general issues and solutions in our Frequent Questions Page. If you have any questions, please do not hesitate to contact us.

Installation of this product requires that you remove the OEM tail light from the motorcycle for the retrofit kit installation.  Please consult a qualified technician or your repair manual for the proper procedure to remove the OEM tail light.

Once the OEM tail light is removed from the motorcycle, installation of the Custom LED Integrated LED Tail Light is detailed in the instructions below.

click icon to download

 

Adobe Acrobat Reader is required to view this file.

If you are having problems viewing the file, please download the free software here.

Custom LED consistently receives rave reviews from our customers about our products!  We try to post a representative group of them on our feedback page on this site, but we can't post them all! 

Our Feedback Profile on our Ebay Auctions are a great way to see what our customers think of our products, because Ebay promotes honest feedback.  Take a look at our Ebay Feedback!

Our commitment to quality, honesty, ingenuity and customer service is really making an impact in an industry full of careless "sell anything" retailers and hack-artist copy-cats.  Trust in our products, and see for yourself...