ELFR-1-QD Electronic LED Flasher Relay with Quick Disconnects

ELFR-1-QD Relé intermitente LED electrónico con desconexiones rápidas

Name: ELFR-1-QD Relé intermitente LED electrónico con desconexiones rápidas
Brand: Custom LED
SKU: ELFR-1-QD
Price: 25.74 USD
Availability: InStock
Rating: 4.95 (187 reviews)

P/N: ELFR-1-QD

$25.74 ~~$32.95~~

In Stock! Order within 10 hours and 14 minutes to ship today! Click Add to Cart to view available shipping methods and rates.

Mantiene la velocidad de parpadeo de los intermitentes OEM para una amplia gama de intermitentes LED y no LED.
Conectividad plug and play con conector OEM (consulte la lista de compatibilidad y/o verifique primero el conector del relé intermitente OEM).
Accesorio recomendado para todas las luces traseras LED integradas LED personalizadas.
Cerca de cero inicial retardo de encendido (otros Los relés LED se retrasan cuando las señales se activan por primera vez).
1 año de garantía y garantía de satisfacción .
Se envía el mismo día hábil.

Descripción general

El ELFR-1-QD es la misma pieza que nuestro relé intermitente LED ELFR-1 , sin embargo, tiene los conectores de desconexión rápida instalados en los cables como se muestra en la imagen. Este conector se ajustará a algunos enchufes de relé intermitente OEM. Consulte la lista de compatibilidad para las bicicletas que se sabe que tienen tomas de relé intermitente OEM compatibles.

Para otras motocicletas que no están en esta lista de compatibilidad, haga clic aquí .

Lea toda la información del producto en la descripción general de nuestra página ELFR-1 para obtener más información sobre este producto.

Especificaciones

Lista de compatibilidad

LISTA DE COMPATIBILIDAD DEL RELÉ INTERMITENTE ELFR-1-QD:

NOTA: SE MUESTRA LA ESPECIFICACIÓN DE EE. UU., PARA LAS ESPECIFICACIONES FUERA DE EE. UU. VERIFIQUE INDIVIDUALMENTE

¡Esta lista determinará si se sabe que el arnés de su motocicleta tiene un enchufe de relé compatible con las desconexiones rápidas en nuestro relé intermitente ELFR-1-QD! Si su bicicleta no está en esta lista, verifique el conector en su relé intermitente OEM antes de ordenar esta pieza. Nuestra unidad ELFR-1 estándar es plug-and-play compatible con muchas motocicletas.

Nota: Si no hay instrucciones de conexión específicas a continuación para su motocicleta, debe seguir las instrucciones de instalación de cableado fijo de "Todas las aplicaciones" para identificar los cables en el enchufe del relé de su motocicleta con una luz de prueba o un voltímetro antes de instalar este producto. La instalación incorrecta del ELFR-1 lo destruirá.

Todas las aplicaciones:

BMW:

Ducati:

Honda:

Kawasaki:

Suzuki:

yamaha:

Si encuentra que el relé de intermitencia de su motocicleta no es de dos cables y/o reemplazable, puede usar los ecualizadores de carga universales LED personalizados junto con su relé de intermitencia original.

Video

Instalación

Accesorios recomendados

Instagram Feed

Tag us @Custom_LED_LLC in your Instagram Photos to see your photos here!

Customer Reviews

5.0 Based on 194 Reviews

5 ★

96%

186

4 ★

3 ★

2 ★

1 ★

Customer Photos

Write a Review Ask a Question

Reviews
Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

relay
bike
installation
customer service
problem
turn signals
flasher
shipping
plug
issues

Custom LED ELFR-1-QD Relé intermitente LED electrónico con desconexiones rápidas Review

08/13/2024

Works Well

Works as described. Easy to install.

Christopher C.

United States

07/04/2024

LED tail light/ turn signals

I have a 2000 Ducati 748. Use to be my track bike and now I have put it back on the road. I bought the integrated LED brake and turn signal. It was a very straight forward installation. I did have a couple questions about the install. I reached out to their customer service, and they got back to me the same day. The lights a quite bright. The way the product is made, allows you to keep the stock lens. Overall, I’m very happy with Custom LED.

Helder F.

Canada

07/06/2024

Custom LED

Helder, thank you for your 5-Star Review! I have to point out though, you should toggle the switch on the circuit board for RED ONLY operation, as you are using the OEM RED lens. The amber turn signal LEDs do not properly project through the red lens, and is only recommended for use with a clear aftermarket lens for proper visibility. Jon Owner - Custom LED

05/16/2024

Good but wish there were better directions

It works, wish it had specific information for the yanaha raider like the location of the stock relay and how to attach the signal wires.

Sophano V.

United States

05/19/2024

Custom LED

Hello Sophano, thank you for your 5-Star Review! Although we don't give instructions as to where the OEM relay is located, we do give wiring instructions in the compatibility list on the ELFR-1-QD product page. Please don't hesitate to call us for additional information that is not listed on our website. Jon Owner - Custom LED

04/01/2024

Exactly what I needed!

I didn't want to cut into my brand new bike's wiring harness & start splicing, I wanted a plug & play remedy that could easily be reversed if necessary. There wasn't a relay for my bike listed on their site, so I called. One eMail & $22.00 later, I had a relay for my bike! Please note: when I made that phone call, Jon could've easily said "no, I don't have one", but he didn't, he asked me a few questions, asked for a photo of what I had, & he took care of me. I really appreciate that, thats good service, & that's rare these days. So if you don't see what you need on their site, call them, maybe they can help you too!

Mark Z.

United States

Paul T. 06/23/2025

Do u have a flasher relay with OEM connection for Yamaha 2006 road star warrior

Answers (1)

Custom LED 06/23/2025

Hi Paul, our ELFR-1-QD is the recommended flasher relay for the Warrior. Please visit the product page and click on the "compatibility list" and then expand the Yamaha section to see installation instructions for your particular motorcycle. Keep in mind that replacing the OEM flasher relay will disable the self-canceling feature of the OEM flasher relay. If you wish to keep this feature, you must use load equalizers instead of replacing the flasher relay. Best Regards, Jon Owner - Custom LED

Derek B. 04/15/2025

I installed the new flasher and double checked the wiring. When I try the trun signal all 4 flash?? Am I doing something wrong?

Answers (1)

Custom LED 04/15/2025

Hello Derek, the 4-Way Blink Problem actually has nothing to do with the flasher relay. A flasher relay can not cause or fix this problem, because of where it sits in the circuit. Please read all about the 4-Way Blink problem, and the solution in our technical blog. Here is a direct link: https://www.customled.com/blogs/custom-led-product-information/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals Regards, Jon Owner - Custom LED

Kevin 04/02/2025

Will this work for my 2023 Yamaha bolt that has a 5 pin connector and only utilize 2 of the 5 pins to work?

Answers (1)

Custom LED 04/02/2025

Our ELFR-1-QD is the correct flasher relay for this, however you will lose the self canceling feature if you replace the OEM relay. Please visit the ELFR-1-QD product page, and view the compatibility list under Yamaha. Best Regards, Jon Owner - Custom LED

Chris G. 03/30/2025

Will this work for a 2023 Kawasaki Vulcan Vaquero 1700?

Answers (1)

Custom LED 03/30/2025

Hi Chris, I believe your motorcycle has the self-canceling 5-pin OEM flasher relay. Our ELFR-1-QD is the correct flasher relay for this, however you will lose the self canceling feature if you replace the OEM relay. Please visit the ELFR-1-QD product page, and view the compatibility list under Kawasaki. Best Regards, Jon Owner - Custom LED

Constantin T. 06/14/2024

Hi there, 2004 Honda VTX 1800N(2), I need a relay for LED. Original relay has 8 pins. Should work for DLR. If you don't have one with same pin configuration, give me a solution to adapt what you have, please. Thank you.

Answers (1)

Custom LED 06/14/2024

Hello Constantin, no one makes a relay that will replace the 8 pin blinker control module on your bike. Instead, you need to use Load Equalizers when switching to LEDs: https://www.customled.com/collections/universal-led-load-equalizers Jon Owner - Custom LED