2005-2009 Suzuki Boulevard M50 Integrated LED Tail Light Retrofit Kit


Custom LED

$89.99 $119.99

In Stock! Click Add to Cart to view available shipping methods and rates.

ELFR-1-U Electronic LED Flasher Relay 7-Pin Suzuki SALE

ELFR-1-U Electronic LED Flasher Relay 7-Pin Suzuki

$22.98 $29.99
Maintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers. Plug and play connectivity with OEM fitment (see compatibility list). Recommended accessory for Custom LED Integrated...
» View full product details
H4 LED Headlight Bulb - High Performance SALE

H4 LED Headlight Bulb - High Performance

$39.99 $79.99
High performance H4 (9003/HB2) LED high/low beam Headlight Bulb (single bulb) High-beam and Low-beam function supported with dual-LED chips Super-bright 1250/2000 Lumens per high/low beam (*real output, not peak) Optimized focal point ensures...
» View full product details
  • Fits 2005, 2006, 2007, 2008 & 2009 Suzuki Boulevard M50.
  • Ultra-Bright LED Circuit Board.
  • Installs into OEM tail light housing (assembly required).
  • All electrical connectors and detailed instructions provided.
  • Made in the USA.
  • 1-Year Warranty & Satisfaction Guarantee.
  • Ships same business day.


    This is an integrated LED tail light retrofit for the 2005, 2006, 2007, 2008, 2009 Suzuki Boulevard M50 with built in yellow turn signals.  All the internals of the stock tail light are replaced with a Custom LED circuit board containing 32 Ultra Bright Red LEDs and 32 Ultra Bright Yellow LEDs - compared to only 12 red LEDs on the stock circuit board.

    Just as on the other Custom LED models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light.  The unit automatically flashes between the red and yellow on the side you're turning!  The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

    The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible!  Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.


      • 32 Ultra Bright Red LEDs for running and brake lights.
      • 32 Ultra Bright Yellow LEDs for turn signals.
      • Custom LED ColorChange Technology on-board.
      • Detailed step by step instructions with illustrations for a simple install.
      • Smart color matched wires matches motorcycle wires for easy wiring.
      • Only 2 wires to hook up outside of tail light housing.
      • All electrical connectors and hardware provided with kit.
      • 1-year Warranty & Satisfaction Guarantee!
      • Made in the USA.
      • NOT DOT approved.


      We have a large collection of all Custom LED product videos on the Custom LED YouTube Channel.

      The videos in this playlist below are a collection of user-submitted and original videos related to this model motorcycle.


      The Custom LED 2005-2009 Suzuki Boulevard M50 Integrated LED Tail Light retrofit kit must be installed into the OEM tail light.

      There may be additional accessories required to correct blinker problems on your motorcycle if you remove your OEM turn signals. These accessories can not be built into the tail light, and are generally optional and specific to different customers needs, so they are sold separately. Please see the recommended accessorie, and read about the general issues and solutions in our Frequent Questions Page. If you have any questions, please do not hesitate to contact us.

      If you remove the front or rear OEM turn signals and replace them with LEDs, the blinkers on your motorcycle will blink faster than stock to alert you that you have a bulb burned-out.  LEDs do not draw as much power as the power-hungry incandescent lamps, so the flasher relay detects this drop in power draw as a lamp failure.  Normally, replacing the flasher relay is the best solution for fast-blink issues as it solves the problem at the source.  Our ELFR-1-U Electronic LED flasher relay is Plug-and-Play on the Boulevard M50, and will keep the front and rear blinkers blinking at the normal speed, regardless of what type of blink lamps they are.

      Installation of this product requires that you remove the OEM tail light from the motorcycle for the retrofit kit installation.  Please consult a qualified technician or your repair manual for the proper procedure to remove the OEM tail light.

      Once the OEM tail light is removed from the motorcycle, installation of the Custom LED Integrated LED Tail Light is detailed in the instructions below.


      Custom LED 2005-2009 Suzuki Boulevard M50 Integrated LED Tail Light - Installation Instructions

      Click icon to download.
      Adobe Acrobat Reader is required to view this file.
      If you are having problems viewing the file, please download the free software here.

      Recommended Accessories

      Instagram Feed

      Tag us @Custom_LED_LLC in your Instagram Photos to see your photos here!

      Stay in Touch

      Call Us

      We'd love to here from you. Call us at 201-477-0031 and we'll be happy to answer any questions you have.

      Free Shipping!

      Get Free Shipping (USA only) on all orders over $199! Use Discount Code: $200ShipsFree

      Latest News

      • 2015-2023 Yamaha YZF-R1 Ultimate Stealth Plate Mounts!

          Custom LED is proud to announce the Ultimate Stealth Plate Mount for the 2015-2023 Yamaha YZF-R1.  This is a perfect compliment to our Blaster-X Tail Lights, or as a stand-alone fender eliminator kit.  This kit has provisions for optional... read more

      • 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light Pre-Orders Open!

        Great News! We are now accepting orders for the 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light! Please visit the product page for more information and to place your order .   read more

      • NEW! 2020 Yamaha MT-03 Blaster-X Tail Light

        Custom LED is pleased to announce our  Blaster-X tail light for the 2020 Yamaha MT-03!  This tail light is based on our highly acclaimed FZ-07 Blaster-X Tail Light, but with the proper turn signal connectors for the MT-03 read more