Blaster-X Integrated LED Tail Lights for Motorcycles feature: Brake Alert, Turn Alert and Strobe Mode
Custom LED's Blaster-X Integrated LED Tail Lights Overview:
Custom LED is proud to offer our unique, high quality Integrated LED Tail Lights for motorcycles. With our Integrated LED Tail Lights, your turn signals are safely and effectively built right into the tail light! It's the best fender eliminator money can buy. Most of our Integrated Tail Light models feature our exclusive Blaster-X Technology with extremely effective safety features built into the tail light.
Our exclusive Blaster-X ultra-high intensity, high-performance, Microprocessor controlled Integrated LED Tail Lights are by-far the brightest and most effective integrated LED tail lights available. Your satisfaction is guaranteed - or your money back!
Custom LED is a pioneer in the art and science of LED tail light integration. Do not waste your money on cheap imitations and half hearted solutions. Do it right from the start with Custom LED. Our products are designed, manufactured and assembled by hand at our facility, right here in the USA. You will notice a significant difference in quality, performance and features with Custom LED.
Would you like to learn more about quality, design principles, and amazing value of Custom LED's Top-Quality Integrated LED Tail Lights? Please read here.
Custom LED's Blaster-X Integrated LED Tail Light Details:
Each Motorcycle Tail Light we produce proudly Made in the USA, and is a high quality, complete plug and play tail light, with clear lens and OEM connectors for a true physical plug-and-play installation. Our Blaster-X Integrated Tail Lights directly replace the OEM tail light without any modification necessary. The tail light lens quality is also equivalent or better than the OEM unit it replaces.
Our Blaster-X high performance Integrated tail lights utilize Ultra-Bright Red LEDs and Ultra-Bright Yellow LEDs to effectively handle the functions of: Running Light (bright red), Brake Light (ultra-bright red) and Turn Signals (yellow) - all within the tail light housing!
Our custom software, developed in-house, ensures that our Blaster-X Tail Lights function as effectively as possible under all situations. This software runs on the on-board Microprocessor, and controls the entire operation of the tail light. The Blaster-X Tail Lights also feature on-board voltage regulation for consistent, reliable, and precise operation.
Most of our Blaster-X Integrated LED Tail Lights now feature the 2nd Generation of our proprietary and patented Blaster-X technology with multiple user-selectable Brake Alert patterns, Turn Alert, Strobe Mode and more!
is our proprietary pulse-width-modulation (PWM) technology that safely squeezes the maximum possible illumination out of LEDs. The result is a significantly less expensive, yet even more outstanding and effective product than other taillights - and widens our advantage over our competitors. Until you have seen a Blaster-X tail light in person, you will not fully understand the superiority of our tail lights.
automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation.
is a NEW approach to our integrated LED tail light operation. Typically, an integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast turn signal operation on that side. The red running light will resume on that side once the turn signal is canceled. If braking and turning, the red will illuminate fully in between blink cycles - because braking should have priority.
is a feature that puts the taillight into a devastating strobe cycle that is sure to get anyone's attention. This mode produces insanely bright pulses of light at ultra high frequencies, in alternating patterns across the tail light. Strobe mode is engaged by grounding a control wire, and can be engaged at any time. Strobe Mode is useful for emergency situations (hazard) or when just showing off!
The Custom LED Blaster-X 2nd Generation Programming Interface allows users to easily customize features of the tail light! The customizable features menu allows users to:
- Enable or Disable the Startup Sequence.
- Choose from 11 different Brake Alert patterns (can also disable Brake Alert).
- Adjust the running light brightness within a preset range.
- Adjust the brake light brightness within a preset range.
- Engage Demo Mode, where the tail light cycles through all functions automatically and repeatedly!
- Reset factory defaults.
This programming interface is accessed very simply through the Strobe Mode control wire, using our Blaster-X Control Switch! The interface is designed to receive input simply by providing ground pulses to the strobe mode control wire. No special equipment is necessary to access and utilize the programming interface! Detailed programming instructions will ship with every unit.
Our Blaster-X Integrated Tail Lights are designed to follow the turn signal commands of the motorcycle's flasher relay. This insures it blinks in lock-step with other turn signals on the motorcycle, and ensures it is compatible with all after market and OEM flasher relays - especially programmable relays such as our ELFR-P. However, in the event that the tail light receives a command to turn that does not break (blink) within a preset time period, the tail light will automatically blink that side.
Non-Sequential Integrated Turn Signals
Custom LED's Blaster-X tail lights are ultra-high intensity, high-performance Integrated LED Tail Lights for motorcycles, with built in non-sequential yellow turn signals. Non-Sequential turn signals have been shown to be more effective for motorcycle applications.
Stealth - Not Smoked Lenses
The Custom LED Blaster-X Integrated LED Tail Lights feature black "stealth" electronics and rear lens assembly for a smoked look, without any loss of performance! The lens is optically clear for maximum visibility, yet has a smoked appearance compared to standard integrated LED tail lights. This allows for visual appeal of a smoked tail light lens, without sacrificing any performance or safety that smoked tail lights certainly lose.
The engineering in our Blaster-X Tail Lights is exceptional and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.