2015-2017 Ducati Multistrada 1200 Blaster-X Integrated LED Tail Light

7   |  

Custom LED

$169.99 $199.99

Add items to the shopping cart to view shipping rates and methods.

Share:

Overview

The Custom LED Blaster-X Integrated LED Tail Lights are the finest tail lights on the market, and the 2015-2017 Ducati Multistrada 1200 is just one of many motorcycle models that we produce tail lights for.

All of our Blaster-X Integrated LED Tail Lights are hand-made here in the USA by the company owner - and motorcycle enthusiast - who puts his pride and craftsmanship into every single product that we produce. Quite simply, this is the best and brightest production tail light that money can buy.

Each Blaster-X Integrated LED Tail Light features powerful and effective safety features built right into the tail light.  These features include: Blaster-X, Brake Alert, Turn Alert, and Strobe Mode.  Click to find out more about these features.

If you are new to the Custom LED brand, perhaps you would like to read about what makes Custom LED's Tail Lights the best available. Also, you may want to read about our founding principles that focus on quality and safety, in each motorcycle tail light that we design, manufacture and assemble. For instance, we do not produce Smoked Tail Lights, or Sequential Tail Lights because they go against the principles that this company is founded on.

Features

  • Plug-and-Play installation with OEM connectors (tail light AND turn signals)
  • FULL CANBus Compatibility for running, brake AND turn signal circuits (normal blink rate, no bulb-out warnings).
  • OEM Fit with high quality clear lens (want smoked lens?)
  • 32 Ultra Bright Red LEDs for running and brake lights
  • 32 Ultra Bright Yellow LEDs for turn signals
  • Stealth black boards for inconspicuous appearance
  • Custom LED ColorChange Technology on-board
  • Custom LED Blaster-X PWM technology on-board
  • Custom LED Strobe Mode
  • Custom LED Brake Alert
  • Custom LED Turn Alert
  • New 2nd Generation Programming Interface allows users to easily customize features
  • New Sure-Blink Technology
  • Built in Stage I Load Equalizers
  • Robust regulated design for consistent and reliable performance
  • 4 MHz microprocessor controlled operation
  • 24/7 customer support
  • 2-year Warranty & Satisfaction Guarantee
  • MADE IN THE USA
  • NOT DOT approved

    Video

    We have a large collection of product videos on our YouTube page.  Be sure to checkout Custom LED on YouTube.

    Below is a demonstration video which shows the features of all 2nd Generation Blaster-X Tail Lights.  Note: Click on the "Playlist" icon in the upper left corner of the video screen to see all Custom LED product videos on YouTube.

    Installation

    The Custom LED 2015-2017 Ducati Multistrada 1200 Blaster-X Integrated LED Tail Light was designed to function as a direct replacement for the OEM tail light.  The unit will install with exactly the same fit and electrical connectors as the OEM unit.  No cutting, splicing, or bodywork modifications are required, what so ever.

    Additional hardware may be necessary if you wish to remove the OEM fender assembly and/or modify the bodywork on your motorcycle.  The fender assembly typically supports the license plate, and OEM blinker lamps.  On some models, removal of this fender assembly leaves gaps or unfinished sections of the bodywork under the tail section.  Keep in mind, our product is a direct replacement for the OEM tail light, and does not require any additional modifications.

    Although our tail light is fully CANbus compatible for the Multistrada 1200, there may be additional accessories required to correct blinker problems on your motorcycle if you remove your front OEM turn signals. These accessories can not be built into the tail light, and are generally optional and specific to different customers needs, so they are sold separately. Please see the recommended accessories in the bullet list above, and read about the general issues and solutions in our Frequent Questions Page. If you have any questions, please do not hesitate to contact us.

    Installation of this product requires that you remove the OEM tail light from the motorcycle, and install this unit in its place.  Please consult a qualified technician or your repair manual for the proper procedure to remove the OEM tail light.

    Once the OEM tail light is removed from the motorcycle, installation of the Custom LED 2015-2017 Ducati Multistrada 1200 Blaster-X Integrated LED Tail Light is detailed in the instructions below.

     

    2015, 2016, 2017 Ducati Multistrada 1200 Blaster-X Integrated LED Tail Light - Installation Instructions

    Click icon to download.
    Adobe Acrobat Reader is required to view this file.
    If you are having problems viewing the file, please download the free software here.

    2nd Generation Programming Interface Supplemental Brake Alert Programming Guide.

    Customer Reviews

    Based on 7 reviews
    5 Star
    71% 
    5
    4 Star
    29% 
    2
    3 Star
    0% 
    0
    2 Star
    0% 
    0
    1 Star
    0% 
    0
    Customer Photos
    Write a Review Ask a Question
    • Reviews (7)
    • Questions (1)

    Thank you for submitting a review!

    Your input is very much appreciated. Share it with your friends so they can enjoy it too!
    GN
    06/05/2017
    Guido N.
    United States

    Great Brake Light

    After Jon had sent me the proper screws to mount the light on my wife’s Multistrada, the install went fine, I used a Ducati service manual to find out the steps needed install the light. Custom LED has shown very, very good service and I would buy again without hesitation.

    HM
    06/01/2017
    Harold M.
    United States

    CustomLED Ducati MTS1200

    Two issues with an otherwise great product. First, the holes in the mounting are bigger than the OEM light so the Factory screws will NOT secure the CustomLED in Place. You need bigger screws. Second, if you remove the OEM Turn Signals you are left with gaping holes in the Tail piece. CustomLED should include "rubber" plugs ( I used Tram # 1281 hole plugs) to install. Both issues can be easily corrected and the first is a manufacturing error by CustomLED. Otherwise works well.

    06/01/2017

    Custom LED

    Thank you for your recent review of our product!  You are absolutely correct about the mounting holes - and I apologize for this mistake.  It's a complicated story as how we arrived at the wrong hole size.  The OEM screws do not work in our tail light at the time I'm writing this.  We are working to modify the injection molds for future production runs to ensure the OEM screws fit our tail light properly.  In the meantime, we are providing the correct mounting screws and washer hardware with these tail lights.  If you did not receive the hardware, please kindly contact us and we will provide them to you at no cost.

    As for the rubber plugs for the OEM turn signal holes, I will look into that.  As you know, the installation of our tail light does not require any modification to the OEM configuration of the license plate bracket, fender assembly or turn signals, what so ever.  As with all of our integrated LED tail lights, if your goals are more than just to install our tail light, then you should purchase that hardware separately.  In your case, you chose to remove the OEM turn signals likely for aesthetic reasons.  The necessary hardware to do so varies drastically from one motorcycle make and model to the other, and the aesthetic preferences of one owner to the next.  In this case, it's a simple rubber plug as you proposed which suits your preferences.  For all of our applications, some individuals choose to run our tail light with integrated turn signals in conjunction with the OEM turn signals or aftermarket turn signals.  In that case, the rubber plugs provided by us would be a waste, and would only add to the cost and sales price of our product.

    Overall, I hope you are satisfied with our product.  At Custom LED, we put a lot of personal pride into every product that we produce by hand right here in the USA at our facility.  The purpose of our Blaster-X Tail Lights is first and foremost to be visible.  The brightness of our tail lights, combined with the advanced safety features like Brake Alert, make our products the most effective aftermarket production integrated tail lights in the world.  It is unfortunate that we missed the issue with the screw holes while producing our first batch, but we have worked very hard to find the perfect solution with the screw hardware we have sourced for the meantime.  Any future purchases of our product will come with the necessary mounting screws.

    BD
    04/12/2017
    Bill D.
    United States

    Awesome

    So far I love it. This the second system I have bought from you guys and they both work great I do hope you are making a system for bmw s1000rr 2014 soon.

    MG
    03/13/2017
    Marc G.
    Belgium

    Much nicer than the original!

    It fits perfectly, and is totally Plug and Play. The look is much nicer than the original Ducati tail light. One drawback, the cables should be a few cm longer.

    2015-2016 Ducati Multistrada 1200 Blaster-X Integrated LED Tail Light
    03/13/2017

    Custom LED

    Hello Marc, and thank you for your review of our product!  We carefully design the cable lengths to match that of the OEM tail lights.  With proper cable routing, our cables should be exactly the correct length.  In the event that there may be a problem on a specific application, please contact us directly!

    GD
    03/01/2017
    Geert D.
    Belgium

    Perfect service, and communication!

    Perfect service! Communication about the status of the parcel was also top notch.

    Stay in Touch

    Call Us

    We'd love to here from you. Call us at 201-477-0031 and we'll be happy to answer any questions you have.

    Free Shipping!

    Get Free Shipping automatically on all orders over $199! (USA only)

    Latest News

    • 2015-2016 Ducati Multistrada Blaster-X Tail Lights are NOW IN STOCK!

      After a long and thorough development process, the 2015-2016 Ducati Multistrada Blaster-X Tail Lights are NOW IN STOCK!  Please visit the product page for product information and to place your order. read more

    • 2016 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light Pre-Orders Open!

      Great News! We are now accepting pre-orders for the 2016 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light! Please visit the product page for more information and estimated release date. Pre-orders are discounted, so be sure to lock in your pricing.  ... read more

    • 2014-2016 Kawasaki Z1000 Blaster-X Integrated LED Tail Light Pre-Orders Open!

      Great News! We are now accpeting pre-orders for the 2014-2016 Kawasaki Z1000 Blaster-X Integrated LED Tail Light! Please visit the product page for more information and estimated release date. Pre-orders are discounted, so be sure to lock in your pricing.... read more