2008-2014 Yamaha Raider Blaster-X Integrated LED Tail Light

  |  
P/N: RAIDER_REV1A_PI2_WL

Custom LED

$129.99 $159.99

In Stock! Click Add to Cart to view available shipping methods and rates.

×
Blaster-X Control Switch for Programming all Custom LED Blaster-X Tail Lights

Blaster-X Control Switch

$4.99
Works with all Blaster-X Tail Lights to control Strobe Mode and the Programming Features. NEW! Features an On-Off-Momentary operation for easy programming and strobe-mode use. Super simple installation with prewired 24" long...
» View full product details
×
ELFR-1-QD Electronic LED Flasher Relay with Quick Disconnects SALE

ELFR-1-QD Electronic LED Flasher Relay with Quick Disconnects

$20.98 $24.99
Maintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers. Plug and play connectivity with OEM connector (see compatibility list and/or check OEM flasher relay connector...
» View full product details
×
H4 LED Headlight Bulb - High Performance SALE

H4 LED Headlight Bulb - High Performance

$39.99 $79.99
High performance H4 (9003/HB2) LED high/low beam Headlight Bulb (single bulb) High-beam and Low-beam function supported with dual-LED chips Super-bright 1250/2000 Lumens per high/low beam (*real output, not peak) Optimized focal point ensures...
» View full product details
×
Custom LED 25 Watt Load Equalizer for LED Turn Signal Blinkers

Load Equalizer - 25 Watt (pair)

$19.98
Provides the same electrical load as a 20 to 30 Watt incandescent bulb. Fixes the fast-blink, no-blink and 4-way blink problems. Comes with non destructive quick-tap connectors. Comes with detailed installation instructions. Superior...
» View full product details
×
Yamaha OEM Turn Signal Y-Splitter Connectors, 3-Wire (pair)

Yamaha OEM Turn Signal Y-Splitter Connectors, 3-Wire (pair)

$12.49
Allows for 2 turn signal lamps to be connected to each turn signal circuit. Increase turn signal visibility with two sets of lamps, such as: Integrated turn signals and auxiliary...
» View full product details
Share:

    Overview

    The Custom LED Blaster-X Integrated LED Tail Lights are the finest tail lights on the market, and the 2008-2014 Yamaha Road Star Raider is just one of many motorcycle models that we produce tail lights for.

    Since our founding in 2003, Custom LED has designed and manufactured our top quality motorcycle tail light products in our own facility, right here in the USA.  The Blaster-X Tail Lights are the result of a steadfast commitment to produce the best and brightest integrated tail lights available.  We put our pride and craftsmanship into every single product that we produce. Quite simply, this is the best and brightest production motorcycle tail light that money can buy.

    Each Blaster-X Integrated LED Tail Light features powerful and effective safety features built right into the tail light.  These features include: Blaster-X Technology with Brake AlertTurn Alert, and Strobe Mode.  Click to find out more about these features.

    If you are new to the Custom LED brand, perhaps you would like to read about what makes Custom LED's Tail Lights the best available. Also, you may want to read about our founding principles that focus on quality and safety, in each motorcycle tail light that we design, manufacture and assemble. For instance, we do not produce dangerously dark Smoked Tail Lights, or Sequential Tail Lights because they go against the principles that this company is founded on.

    Features

    • Plug-and-Play installation with OEM connectors (tail light AND turn signals)
    • OEM Fit with high quality clear or smoked lens (want smoked lens?)
    • 32 Ultra Bright Red LEDs for running and brake lights
    • 32 Ultra Bright Yellow LEDs for turn signals
    • Stealth black boards for inconspicuous appearance
    • Custom LED ColorChange Technology on-board
    • Custom LED Blaster-X PWM technology on-board
    • Custom LED Strobe Mode
    • Custom LED Brake Alert
    • Custom LED Turn Alert
    • 2nd Generation Programming Interface allows users to easily customize programmable features
    • Custom LED Sure-Blink Technology
    • Built-in Stage I Load Equalizers
    • Robust regulated design for consistent and reliable performance
    • 4 MHz microprocessor controlled operation
    • 24/7 customer support
    • 2-year Warranty & Satisfaction Guarantee
    • MADE IN THE USA
    • NOT DOT approved

      Video

      We have a large collection of all Custom LED product videos on the Custom LED YouTube Channel.

      The videos in this playlist below are a collection of user-submitted and original videos related to this model motorcycle.

      Installation

      The Custom LED 2008-2014 Yamaha Raider Blaster-X Integrated LED Tail Light was designed to function as a direct replacement for the OEM tail light.  The unit will install with exactly the same fit and electrical connectors as the OEM unit.  No cutting, splicing, or bodywork modifications are required, what so ever.

      Additional hardware may be necessary if you wish to remove the OEM fender assembly and/or modify the bodywork on your motorcycle.  The fender assembly typically supports the license plate, and OEM blinker lamps.  On some models, removal of this fender assembly leaves gaps or unfinished sections of the bodywork under the tail section.  Keep in mind, our product is a direct replacement for the OEM tail light, and does not require any additional modifications.

      There may be additional accessories required to correct blinker problems on your motorcycle if you remove your OEM turn signals. These accessories can not be built into the tail light, and are generally optional and specific to different customers needs, so they are sold separately. Please see the recommended accessories, and read about the general issues and solutions in our Frequent Questions Page. If you have any questions, please do not hesitate to contact us.

      Generally speaking, replacing the OEM flasher relay with our ELFR-1-QD Electronic LED Flasher Relay is the best way to maintain the stock blink rate after removing any of the OEM turn signals (why do I need to do this?).  However, the Raider has a self-canceling turn signal feature which will be lost if you replace the stock flasher relay.  For those who insist on maintaining the self-canceling turn signal feature, you must use the 25-Watt Load Equalizers to slow down the blink rate.  If you are used to canceling your own turn signals and don't care about the feature, then you should replace the flasher relay with our ELFR-1-QD, as this is the correct way to control the blink rate on any motorcycle with LEDs installed.  It is highly recommended that you correct the blink rate on your motorcycle as the fast blink rate is a failure-mode of the stock flasher relay, and the overall turn signal system does not perform as well as a result.

      Installation of this product requires that you remove the OEM tail light from the motorcycle, and install this unit in its place.  Please consult a qualified technician or your repair manual for the proper procedure to remove the OEM tail light.

      Once the OEM tail light is removed from the motorcycle, installation of the Custom LED 2008-2014 Yamaha Raider Blaster-X Integrated LED Tail Light is detailed in the instructions below.

       

      2008 2009 2010 2011 2012 2013 2014 Yamaha Raider Blaster-X Integrated LED Tail Light - Installation Instructions

      Click icon to download.
      Adobe Acrobat Reader is required to view this file.
      If you are having problems viewing the file, please download the free software here.

      2nd Generation Programming Interface Supplemental Brake Alert Programming Guide.

      Recommended Accessories

      NOTE: Read the Installation tab to choose between using the ELFR-1-QD OR the 25-Watt Load Equalizers.

      Instagram Feed

      Tag us @Custom_LED_LLC in your Instagram Photos to see your photos here!

      Stay in Touch

      Call Us

      We'd love to here from you. Call us at 201-477-0031 and we'll be happy to answer any questions you have.

      Free Shipping!

      Get Free Shipping (USA only) on all orders over $199! Use Discount Code: $200ShipsFree

      Latest News

      • 2015-2023 Yamaha YZF-R1 Ultimate Stealth Plate Mounts!

          Custom LED is proud to announce the Ultimate Stealth Plate Mount for the 2015-2023 Yamaha YZF-R1.  This is a perfect compliment to our Blaster-X Tail Lights, or as a stand-alone fender eliminator kit.  This kit has provisions for optional... read more

      • 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light Pre-Orders Open!

        Great News! We are now accepting orders for the 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light! Please visit the product page for more information and to place your order .   read more

      • NEW! 2020 Yamaha MT-03 Blaster-X Tail Light

        Custom LED is pleased to announce our  Blaster-X tail light for the 2020 Yamaha MT-03!  This tail light is based on our highly acclaimed FZ-07 Blaster-X Tail Light, but with the proper turn signal connectors for the MT-03 read more