2006-2009 Yamaha YZF-R6S Blaster-X Integrated LED Tail Light Retrofit Kit

P/N: 03R6_REV5A_PI2

Custom LED

$99.99 $129.99

In Stock! Click Add to Cart to view available shipping methods and rates.

Blaster-X Control Switch for Programming all Custom LED Blaster-X Tail Lights

Blaster-X Control Switch

Works with all Blaster-X Tail Lights to control Strobe Mode and the Programming Features. NEW! Features an On-Off-Momentary operation for easy programming and strobe-mode use. Super simple installation with prewired 24" long...
» View full product details
ELFR-1 Electronic LED Flasher Relay for Motorcycle LED Blinkers - OEM Connector SALE

ELFR-1 Electronic LED Flasher Relay with OEM Connector

$19.98 $24.99
Maintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers. Plug and play connectivity with OEM connector for 2-wire AND 3-wire OEM Flasher Relay Connectors (see...
» View full product details
High-Performance H7 LED Headlight Bulb - Custom LED SALE

H7 LED Headlight Bulb - High Performance

$39.99 $79.99
High performance H7 LED Headlight Bulb (single bulb) Super-bright 2000 Lumens (*real output, not peak) Optimized focal point ensures light is projected onto the road Super Efficient 25 Watts power consumption Active...
» View full product details
Yamaha OEM Turn Signal Connectors, 3-Wire

Yamaha OEM Turn Signal Connectors, 3-Wire (pair)

Typically used for front and rear turn signal connectors on some Yamaha motorcycles. Fits multiple years/models - confirm individually. Comes with 8" long 22AWG wire installed. Protective sheathing prevents chafing....
» View full product details
Yamaha OEM Turn Signal Y-Splitter Connectors, 3-Wire (pair)

Yamaha OEM Turn Signal Y-Splitter Connectors, 3-Wire (pair)

Allows for 2 turn signal lamps to be connected to each turn signal circuit. Increase turn signal visibility with two sets of lamps, such as: Integrated turn signals and auxiliary...
» View full product details


            The Custom LED Blaster-X Integrated LED Tail Lights are the finest tail lights on the market, and the 2006-2009 Yamaha YZF-R6S is just one of many motorcycle models that we produce tail lights for.

            This is a Retrofit Kit, which is a circuit board which must be installed into the OEM tail light according to the instructions that come with the unit, and can be downloaded in the installation section of this page.  We do not make a complete tail light with lens for the 2006-2009 Yamaha YZF-R6S.

            Since our founding in 2003, Custom LED has designed and manufactured our top quality motorcycle tail light products in our own facility, right here in the USA. The Blaster-X Tail Lights are the result of a steadfast commitment to produce the best and brightest integrated tail lights available. We put our pride and craftsmanship into every single product that we produce. Quite simply, this is the best and brightest production motorcycle tail light that money can buy.

            Each Blaster-X Integrated LED Tail Light features powerful and effective safety features built right into the tail light.  These features include: Blaster-X Technology with Brake AlertTurn Alert, and Strobe Mode.  Click to find out more about these features.

            If you are new to the Custom LED brand, perhaps you would like to read about what makes Custom LED's Tail Lights the best available. Also, you may want to read about our founding principles that focus on quality and safety, in each motorcycle tail light that we design, manufacture and assemble. For instance, we do not produce dangerously dark Smoked Tail Lights, or Sequential Tail Lights because they go against the principles that this company is founded on.


            • 32 Ultra Bright Red LEDs for running and brake lights.
            • 32 Ultra Bright Yellow LEDs for turn signals.
            • Stealth black boards for inconspicuous appearance
            • Custom LED ColorChange Technology on-board
            • Custom LED Blaster-X PWM technology on-board
            • Custom LED Strobe Mode
            • Custom LED Brake Alert
            • Custom LED Turn Alert
            • 2nd Generation Programming Interface allows users to easily customize programmable features
            • Custom LED Sure-Blink Technology
            • Robust regulated design for consistent and reliable performance.
            • 4 MHz microprocessor controlled operation.
            • Detailed step by step instructions with illustrations for a simple install.
            • Smart color matched wires matches motorcycle wires for easy wiring.
            • Only 3 wires to hook up outside of tail light housing.
            • All electrical connectors and hardware provided with kit.
            • 1-year Warranty & Satisfaction Guarantee 
            • MADE IN THE USA!
            • NOT DOT approved.


              We do not have any videos specifically for the 2006-2009 Yamaha YZF-R6S Integrated LED Tail Light Retrofit Kit, but be sure to checkout Custom LED on YouTube for product videos.


              The Custom LED 2006-2009 Yamaha YZF-R6S Integrated LED Tail Light retrofit kit must be installed into the OEM tail light.

              There may be additional accessories required to correct blinker problems on your motorcycle if you remove your OEM turn signals. These accessories can not be built into the tail light, and are generally optional and specific to different customers needs, so they are sold separately. Please see the recommended accessories, and read about the general issues and solutions in our Frequent Questions Page. If you have any questions, please do not hesitate to contact us.

              Installation of this product requires that you remove the OEM tail light from the motorcycle for the retrofit kit installation.  Please consult a qualified technician or your repair manual for the proper procedure to remove the OEM tail light.

              Once the OEM tail light is removed from the motorcycle, installation of the Custom LED 2006-2009 Yamaha YZF-R6S Integrated LED Tail Light is detailed in the instructions below.


              2006 2007 2008 2009 Yamaha YZF-R6S Integrated LED Tail Light Retrofit Kit - Installation Instructions

              Click icon to download.
              Adobe Acrobat Reader is required to view this file.
              If you are having problems viewing the file, please download the free software here.

              2nd Generation Programming Interface Supplemental Brake Alert Programming Guide.

              Recommended Accessories

              Instagram Feed

              Tag us @Custom_LED_LLC in your Instagram Photos to see your photos here!

              Stay in Touch

              Call Us

              We'd love to here from you. Call us at 201-477-0031 and we'll be happy to answer any questions you have.

              Free Shipping!

              Get Free Shipping (USA only) on all orders over $199! Use Discount Code: $200ShipsFree

              Latest News

              • 2015-2023 Yamaha YZF-R1 Ultimate Stealth Plate Mounts!

                  Custom LED is proud to announce the Ultimate Stealth Plate Mount for the 2015-2023 Yamaha YZF-R1.  This is a perfect compliment to our Blaster-X Tail Lights, or as a stand-alone fender eliminator kit.  This kit has provisions for optional... read more

              • 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light Pre-Orders Open!

                Great News! We are now accepting orders for the 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light! Please visit the product page for more information and to place your order .   read more

              • NEW! 2020 Yamaha MT-03 Blaster-X Tail Light

                Custom LED is pleased to announce our  Blaster-X tail light for the 2020 Yamaha MT-03!  This tail light is based on our highly acclaimed FZ-07 Blaster-X Tail Light, but with the proper turn signal connectors for the MT-03 read more